Block ip Trap

Measure solar irradiance with confidence

21 Jul 2022

The new SMP12 is a fast response spectrally flat Class A pyranometer that combines solid-state dome heating preventing dew and frost, with no moving parts, and powerful surge protection to maximize accuracy and minimize maintenance. The SMP12 combines sensor and diffuser technology from the RaZON+ PH1 and PR1 radiometers with an enhanced version of the Smart interface and the low maintenance of the SMP10. The SMP12 has an internal drying cartridge that will last for at least 10 years if the housing is not opened. This further reduces maintenance significantly. The SMP12 has a 2-wire RS-485 Modbus RTU interface but it does not have an analog output. The characteristics of the thermopile detector provide a fast response time of less than half a second. The wide power supply range from 10 to 30VDC makes integration into solar energy plant performance monitoring stations easy. SMP12 has 2-stage surge and reverse polarity on the power input and 3-stage surge protection on the RS-485 data lines. The calibrated sensitivity is stored in memory and the Modbus irradiance value is directly in W/m2. Pyranometers can be exchanged or recalibrated and no changes in the plant monitoring data logger or SCADA system are needed. SmartExplorer Windows software provides data logging on a PC, display of data, changing RS-485 communication settings, setting the Modbus address, and more. SmartExplorer is free and can be downloaded from the web.

Kipp & Zonen | www.otthydromet.com

 


Volume: 2022 July/August