Mounting system for flat and low-slope roofs

15 Sep 2019

Quick Mount PV has launched their new QRail Tilt System which allows installation of the QRail Racking System on a variety of low slope commercial and residential roof types. In addition, The QRail Tilt system allows access to the roof for maintenance and repairs without removing the array, enables installation over roof obstructions, and prevents roof degradation. The QRail Tilt System utilizes the QBase Deck Mount, which can be attached directly to the deck or a structural member based on site-specific requirements. Especially for buildings that have structural load constraints, QRail Tilt can make a solar project possible. The system can be installed at a 5° or 10° tilt with a large assortment of height options. Design assistance is available through Quick Mount PV’s technical team. The new system adds to Quick Mount PV’s solar mounting and racking systems. All Quick Mount PV products are manufactured at their California manufacturing facility. The company provides both virtual and in-person trainings for solar installers all across the country. Quick Mount’s Elevated Water Seal Technology has allowed the company to install over fourteen million roof attachments over ten-plus years with zero leaks. 

Quick Mount PV | http://www.quickmountpv.com

 

 


Volume: 2019 September/October