Page 59 - North American Clean Energy September October 2015

Ground-mount dealer kits
AET’s ECO product line focuses on achieving cost savings for developers and EPCs while maintaining

quality and function of each product. AET’s network of distributors is now fully stocked with Rayport-G
ECO Ground Mount Dealer Kits. hese kits include pre-engineered drawings with BOM’s and provide
accurate guidance on the number of posts based on site-speciic wind and snow loads. Installers and EPCs
have the ability to purchase of-the-shelf for their commercial or residential project needs.
Third-generation
Applied Energy Technologies (AET) | www.aetenergy.com
tracker Booth 5326
Developed for highly eicient PV

power plants, Array Technologies’
third-generation DuraTrack HZ v3
has a redesigned drivetrain which
incorporates two-stage gearing and

lightweight telescoping drivelines
which have articulating joints for
site lexibility. he DuraTrack HZ v3
minimizes driveline and module gaps to

maximize array density, site utilization,
and production output, while requiring
half of the motors and controllers per
MW compared to the previous model.

Octagonal torque tubes enable the
installation of up to 80 modules per
row. To speed module installation,
Array Technologies has developed a

single-fastener per module clamp with
integrated grounding. he drivetrain has
sealed gearboxes that are maintenance
free for the tracker’s 30-year design

life. A passive wind mitigation feature
protects against storm survival risks and
the maintenance requirements associated
with active stow components.

Array Technologies
www.arraytechinc.com
Booth 4905

Ballast box, ground-
mount solution

Powers Solar Frames introduces a new,
pre-engineered 5-panel ballast box

ground-mount solution for residential
or commercial, landills, and brown
ields. Each unit consists of the box,
posts, purlin, connection hardware,

and 20 patented Gator Clamps
(UL2703 certiied for grounding) for
connecting the modules to the purlins.
With all prepunched, galvanized

components, this solution ranges from
10° to 30°, provides for up to 30 pdf
snow load, and 110 mph wind load.
Raise the posts out of the box and lock

them in place, bolt the purlin to the
posts, add concrete, and secure the
panels to the purlins with the Gator
Clamp (4 per panel). A simple solution

which reduces install time and costs.
Powers Solar Frames
www.powerssolarframes.com

Booth 7410