Page 27 - North American Clean Energy November December 2015

Wire management products
High current relay
Mini-wave soldering solution

he SnapNrack UL listed Junction Box is 6" x 5"
IDEC Corporation announces the addition of the
he IW1 S151 EMS machine is based on the IW1 induction slot
x 3" and when integrated with DIN rail mounts RL family of high current electromagnetic relays
pump system—a mini-wave system, which has been built into a
inside, it’s large enough for wire management but to its existing relay line. here are forty diferent variety of special machines from EUTECT. he soldering system

small enough to be adaptable to any mounting variations of the RL relay to it a wide variety of is characterized by its lexible nozzle receptacle. he solder
coniguration. Installation requires a 1/2" socket applications. he single-pole version can switch up to nozzle and nozzle receptacle are made of coated V4A and has an
along with the standard Snap-In features. A 30A, and the two-pole version can switch up to 25A. integrated selective shielding-gas guide by virtue of which the
temperature range of -40°F to 185°F, in combination Both versions can handle a 3HP/277Vac load.
shielding-gas shroud lies closely against the solder wave for an

with a NEMA 4X rating will allow it to hold up in Two mounting options are available, lange optimal process. he solder nozzle can be replaced quickly with
extreme environments, while an aesthetic black color mount and DIN rail. he DIN rail version of the
the exchange couplings.
will provide full UV protection to extend the life of RL clips right onto a DIN rail and does not require he assemblies are submerged by lowering into the continually
the box and its contents.
the purchase of a socket or adapter. Screw or lowing solder. hus the solder lows in an endless loop, protected

SnapNrack’s Trunk Cable Clamp secures one or quick-connect tab terminals are available for both from oxidation by nitrogen, and minimizing the formation of
two Micro-Inverter trunk cables along SnapNrack mounting options, facilitating quick and easy solder beads and slag via selected return low.
Rail Channels, transitioning in and out of channels, installation. Another feature facilitating quick Two soldering frames are always in use in order to minimize
and routing across rails. As an alternative to plastic installation is the horizontal orientation of the relay cycle time. he assembly is provided with lux before the actual

zip ties, the SnapNrack Trunk Cable Clamp works when mounted on a DIN rail.
soldering process begins. Flux is applied via an injection nozzle
with all known Micro-Inverter AC Trunk Cable he RL has a wide 3 mm double break contact that applies lux points of 1.5 mm to 3.0 mm diameter. he
diameters and is made from iber reinforced resin gap, which makes it ideal for breaking higher operator can populate a second solder frame with assemblies
developed for high UV exposure and the temperature voltage loads, and extends the life of the relay as while components are being soldered. Both solder frames are

range on a rooftop (rated for -40°F to 185°F).
loads are broken with reduced arcing, and it greatly subsequently exchanged in a single production step whereby cycle
SnapNrack’s line of wire management solutions reduces the chances of contact welding on overload times diminish and greater piece counts can be produced. A linear
also includes the SnapNrack 4-Wire Clamp. switching.
axis handler receives the solder frames and positions them exactly
Providing the same beneits as the trunk cable clamp Single and two-pole versions are available, along within the machine.

for PV cables and the Wire Clip, the 4-Wire Clamp is with a wide range of coil voltages including 12Vdc, EUTECT GmbH. | www.eutect.de
designed to cover and hold all electrical conductors 24Vdc, 24Vac, 110-120Vac and 220-240Vac. A
in the rail channel for a full wire management clear plastic cover can be ordered for the screw
system.
termination relays to provide personnel protection.

SnapNrack | www.SnapNrack.com
IDEC Corporation | www.idec.com

Know the

Eficiency

of your

Solar Plant
Self-grounding PV system
Anti-turn mechanical
SunModo Corp’s, Self-Grounding System makes
connectors

easy work of bonding an entire racking system to a New to ILSCO, aluminum mechanical
grounding source. Built-in grounding pins in easy-to- lugs (Type ATTA and ATAU) with an anti-
use components invisibly pierce rail coatings to form rotation feature which reduces the risk of
a reliable, durable grounding connection as part of the movement at installation. he connectors

natural installation process.
are manufactured from high strength
he SunModo next generation Self-Grounding aluminum alloy and are suitable for use
System includes T-bolts with locking features, mid and with copper or aluminum conductors. he
end clamps, rail splices, shared rail adaptors and lugs, chamfered wire entry simpliies conductor mpliant
CAISO Coard
all featuring grounding pins. It handles landscape or insertion. Diferent conigurations are WS310
Secondary Stand
portrait coniguration to minimize roof time and parts available, one or two wire port design with Measurement
required. he self-grounding system spares installers various hex size options, to suit a variety of h #3249
the need to order, stock, and transport additional application needs. his ofering is UL Listed Find us at SPI Boot

grounding hardware to the rooftop.
and CSA Certiied.
he product line is the subject of two patents and ILSCO | www.ilsco.com
one patent pending, and has completed UL 2703
certiication.
WS510
SunModo | http://umt-h.schurter.com/
Smart Weather Sensor www.lufftsolar.com

North American Clean Energy 27

4_Solar-Ad_USA__SPI 08_2015.indd 1
13.08.15
08:53