Page 26 - North American Clean Energy November December 2015

solar energy

Grounded, rail-less Compact SMD push- Three-phase inverter
Compact universal,
mounting system
pull transformers
modular fuse
SolarEdge is extending its commercial
he Zilla Phantom XL Lo-Pro is a low TDK Corporation presents a new series
ofering with the launch of SE14.4K SCHURTER expands the rated current
proile version of the Zilla Phantom XL of EPCOS SMD push-pull transformers and SE33.3K three-phase inverters. range of its UMT-H Universal Modular

rail-less, pitched roof solar mounting featuring compact dimensions of just 9 hese inverters are meant to minimize fuse, to 12.5 A and 16 A. With its square,
system, the watertight rooftop mm x 8 mm x 5.7 mm. Windings with the number of required inverters and compact design of 5.3 mm x 16 mm, the
installation which attaches anywhere
center taps are located on both the to improve system ROI. All inverters UMT-H is a space-saving alternative to
on a composite roof, in almost any primary and secondary side. he series have integrated safety, monitoring, and classic cylindrically shaped cartridge fuses

coniguration. he Phantom Lo-Pro comprises ive types with diferent communication features.
and is well suited for automated assembly.
utilizes the Zilla Double Stud with transformation ratios ranging between Designed to operate with SolarEdge he smaller footprint saves valuable board
Encapsulated Gland Washer to provide 1:1 and 1:3.8. his enables voltage ratios commercial power optimizers, the P600 space, allowing for further downsizing of
2-1/4 or 2-7/8 inches between the roof of 5 V to 5 V or 3.3 V to 12 V to be and P700, the inverters can allow up to equipment. his time-lag fuse provides

deck and the bottom of the module implemented. Depending on the type, the 2.5 times longer strings compared to overcurrent and short circuit protection for
frame. his rail-less mounting system inductance values of the primary winding traditional inverters. he SE14.4KUS widespread applications in both electronic
provides installation professionals
are between 9.5 μH and 94 μH.
inverter supports the 120/208V
and industrial equipment and controls.
with the lexibility to attach directly to he transformers of the new B82805 WYE and 208V Delta grids, and the he UMT-H fuse is now available in 21

sheathing or structure and features the series are designed for a typical switching SE33.3KUS inverter supports the rated currents from 160 mA through 16 A
Zilla Top Clip with integrated grounding frequency of 250 kHz and operating 277/480V WYE grid.
at voltages up to 277 VAC and 250 VDC.
for installations requiring fewer temperature range of between -25°C
he new inverters come with an he 1500 A high breaking capacity fuse
materials. he Phantom XL Lo-Pro is a and +125°C. he RoHS-compatible integrated DC Safety Switch that ofers meets the IEC 60127-7/1, UL 248-14 and

complete roof mount lashing and solar components are suitable, for example, support for 3 fused DC strings input CSA C22.2 standards and is unique in its
mounting system in one convenient for smaller switched-mode power (plus & minus) and have a standard 12- class for having obtained both VDE and
package for easy shipping and transport supplies using push-pull technology
year warranty, extendable to 20 or 25 UL approvals. he UMT-H’s high breaking
along with maximum lexibility.
and for electrical isolation in industrial years.
capacity of 1500 A, plus the >10 mm

Zilla | www.zillarac.com
automation and process engineering SolarEdge | www.solaredge.com
spacing between end caps, combined with
applications.
the ability to be impermeable to conformal
TDK | www.epcos.com
coating, makes the fuse suitable for
intrinsically safe applications according to

60079-11.
SCHURTER Inc. | www.schurter.com

Substation gateway
cTUVus certiied controllers

RESOL presents a range of controllers from the DeltaSol solar controller family: the Power management company Eaton announced a new, powerful user interface for its
DeltaSol AL, DeltaSol BS Plus, and DeltaSol BX. All three controllers are cTUVus Cooper Power Series SMP gateway solutions, which are designed to help customers build

certiied and equipped with a RESOL VBus data interface, which allows for controller a smarter electrical grid and enhance real-time response to events and avoid power
connections to additional modules, such as remote displays and data loggers. A large interruptions.
system-monitoring-display and intuitive interface ensure user-friendly controller he SMP gateway is engineered to gather data, translate protocols, strengthen cyber-
operation.
security and provide a substation interface for utility, mining, oil and gas, renewable

he DeltaSol AL ofers a temperature diferential controller which includes all energy, as well as other commercial and industrial applications. he latest software and
vital functions required in a standard solar thermal system such as heat quantity irmware updates to the SMP substation gateway can help customers reduce hardware
measurements, a solar operating hours counter, and optional °F or °C read-outs.
costs and maintenance, while providing intuitive access to alarm management and remote
he DeltaSol BS Plus controller is pre-programmed with 10 basic solar thermal system substation monitoring.

layouts including one which includes heat dump functionality (to dissipate excess heat). Eaton’s periodic upgrades to the SMP gateway provide new functionality and help
With its four relay outputs and seven sensor inputs, the DeltaSol BX ofers a variety of customers to keep up with evolving standards. he new user interface for the SMP gateway
possible solar thermal applications. hat variety is extended by an impulse input and includes an alarm management system, single-line diagram capabilities and eicient
two PWM outputs. he DeltaSol BX has an extra-large display and an intuitive operating commissioning tools to reduce customer costs and extend product capabilities. Now, the

interface. he controller’s pre-deined systems for a range of one- and two-store system SMP gateway can also be used as a substation gateway and human-machine interface
layouts can be extended by a number of diferent add-on functions. he controller (HMI), providing customers with an alternative to PC-based HMI solutions and saving on
includes connections for Grundfos Direct Sensors, allows for connection to and speed hardware costs. Eaton’s technology also enables remote access to alarm management and
control of high-eiciency pumps, and can log data onto an SD memory card.
substation monitoring.

RESOL | www.resol.com
Eaton | www.eaton.com

26 nacleanenergy.com
NOVEMBER/DECEMBER 2015