Page 57 - North American Clean Energy July August 2015

Solar PV wire
Southwire’s PV Photovoltaic Wire (2000 volt XLP – Copper) is manufactured using stranded copper conductors with a single layer XLP
construction, and carries the UL Subject 4703 speciications. It is suitable for use in solar power applications per NEC Article 690, rated

90°C for exposed or concealed wiring in wet or dry locations, and is rated for direct burial.
Southwire Company, LLC | www.southwire.com
Booth 9126

Frameless 72-cell
module
Trina Solar introduces the next

generation utility-scale, PID-resistant,
reliable and durable dual glass DUOMAX
modules. he durability of DUOMAX
starts with two sheets of heat-

strengthened glass and a special seal to
create a PID and micro-crack resistant
panel. It is certiied against sand, salt,
mist, ammonia, alkali, and hail beyond

industry standards. he strong, glass-
on-glass design makes DUOMAX a
solution for systems installed in regions

with hot temperatures and humid
climates.
he 72-cell module has a maximum
system voltage of 1500 volts, which

allows for more modules per string and
reduces balance-of-system costs. With
just a 0.5% annual degradation rate, the
DUOMAX module delivers more energy

over its lifetime than a conventional
module. he durability of DUOMAX is
combined with Trina Solar’s 30-year
warranty to serve customer applications.

Trina Solar | www.trinasolar.com
Booth 7511

Solar grounding

and bonding
solutions
ILSCO’s BPad series of connectors

have an exclusive Viritium green
plating process which designates the
ground points clearly at installation.
Solar bonding washers (SBW), clips

(SBC), and jumper cables (SBJ) are
approved for use with anodized
aluminum, mill-inished aluminum,
as well as galvanized steel rack

mounting systems. Conical contact
points penetrate the mounting
surface to create a solid bond. UL2703
Certiied.

ILSCO | www.ilsco.com
Booth 9127

North American Clean Energy 57