Page 55 - North American Clean Energy July August 2015
P. 55
PTFE materials for module laminators
Steinbach’s PTFE transport belts and release sheets are custom manufactured to a
laminator’s speciications. Both high PTFE-content as well as anti-static coatings are
available in a variety of thicknesses and widths. Smooth surfaces as well as porous or mesh
materials are available with glass iber or Aramid as substrate options. Many materials can
also have self-adhesive backing added for a wide variety of production applications.
Smartech International LP | www.smartechonline.com
Booth 7639
Solar power
mini-inverter
CyboInverter is a patented solar power
mini-inverter with the beneits of both
Central inverters and Microinverters.
CyboEnergy ofers on-grid, of-grid,
and on/of-grid CyboInverters for the
global market. Each CyboInverter has
4 input-channels that connect to 4
solar panels, producing 1.2KW peak
power. Each input channel has MPPT
to eliminate partial shading problems.
Multiple on-grid CyboInverters can
daisy-chain so the system is “plug
and play”. Because there is no high-
voltage DC, the system is safe and
Taking solar attachment
easy to install, making CyboInverters
a solution for rooftop installations. beyond
CyboEnergy also ofers various of-
grid CyboInverters to build lexible,
battery-less, or battery-enabled solar
power systems for Microgrids and solar
heating.
CyboEnergy
the Stone Age.
www.cyboenergy.com
Booth 8721
When it comes to securing solar panels to commercial rooftops,
most racking systems are designed to be secured in place with
ballast blocks or cement pavers.
Trouble is that even ballasted rack systems can still move around
on the roof. Plus sharp or broken pieces of ballast can damage
roof covers, leaving the building vulnerable to leaks and other
Eficient PV roof problems. More important, many buildings cannot accom-
connector
modate the dead load weight that ballasted systems require.
he MC4-EVO 2 is the latest
addition to the MC4 PV connector OMG PowerGrip and PowerGrip Plus were designed to help
range, and has just been launched reduce the ballast from these racking systems, and are ideal for
by Multi-Contact. he new use on roofs covered with TPO or PVC roof membranes. OMG
connector has been approved for PowerGrip products provide a secure connection directly to
1500 V DC (IEC, T̈V) and 1000
the roof deck or structural members and once heat welded in
V DC (UL). It is highly eicient,
where currents of up to 45 A can place, properly installed PowerGrip products help minimize rack
movement and remain watertight.
be transmitted with a cable cross
section of 4 mm2/12 AWG, 53 A Let us show you how the OMG PowerGrip or PowerGrip Plus
can be transmitted with a cable
can help bring your next installation beyond the stone age!
cross section of 6 mm2/10 AWG,
and 69 A can be transmitted with Scan the code to see how PowerGrip works,
a cable cross section of 10 mm2/8 then visit OMGPowerGrip.com or call
AWG. MC4-EVO 2 is compatible
800.633.3800 for more information.
with the entire MC4 range and
meets the requirements for NEC
2011. he MC4-EVO 2 and MC4-
EVO 3 series have been entered
into the JET component database
for the irst time, thus meeting the
requirements for use in Japan. Superior productivity.
Multi Contact
Superior performance.
www.multi-contact.com
Booth 8511
800.633.3800
www.OMGRooing.com
OMG PowerGripM is a trademark of OMG, Inc. Copyright © 2015 OMG, Inc. All rights reserved.
