Block ip Trap

Cordless bar cutter

15 Sep 2021

Enerpac introduces the Cordless Bar Cutter to its hydraulic cutters line. The new battery-powered model was designed for those who work in environments without access to on-site power. It is a portable, convenient, and safe solution where external power is not available or where spark risk is a concern. The Enerpac Cordless Bar Cutter has self-contained power, so no external power source is required. This makes the tool completely portable. Another convenient feature on the cutter is a 360° rotating head that allows the tool to be positioned flat on a work surface where metal bar can be fed through the blades from a comfortable working position, and it can be rotated in any orientation needed to finish hard-to-reach cuts on the jobsite. Another way Enerpac makes the tool convenient is by supplying it with two batteries and a charger so the operator can keep working when the first battery needs to be charged. The new Enerpac cordless bar cutter is designed to minimize safety risks, with the bar being held in place behind a protective guard, so there are also no shooting sparks, exploding blades, or exposure to high RPM cut-off wheels. The cordless bar cutter cuts most common rebar within seconds. It quickly cuts up to #6 (20mm) rebar and similar metals up to 0.79" (20mm) in diameter. The cutter offers a controlled, shear cut that is repeatable, providing a uniform precise cut every time. 

Enerpac |


Volume: 2021 September/October