Page 9 - 2019 Solar Buyers Guide

2019 solar buyers guide
Leoch Battery Corp.
Leoch’s Pure Lead + Carbon Technology has been specifically engineered to support partial-state-of-charge applications where the batteries are cycled regularly. These high power, energy dense batteries offer super- fast charging from 0% to 90% in 1.5 hrs. with high performance in extreme environmental conditions and a long deep cycle life of 2200+ @ 50% DoD. The ABS-poly-carbonate jars enable wide operating tempera- tures from -30°C to +60°C. Telcordia approved NEBS level III, GR63, and tested to IEC 60896-21-22 requirements.
www.leoch.us
Lithium Werks
Lithium Werks manufactures lithium ion batteries that can be arranged
in systems between 12V-1000V, from kWh to MWh. As a result of stable, high-quality, lithium iron phosphate (LiFePO4) chemistry, Lithium Werks’ diverse offerings of 12V, 24V, and 36V modules have a high cycle life and float life, suitable for energy storage markets such as renewables and UPS. Through this design, lithium ion batteries can act as a “drop-in” replacement for lead-acid batteries or be easily assembled into larger systems of any voltage and capacity.
www.lithiumwerks.com
Phocos Americas, Inc.
The Phocos CIS-MPPT Series of charge controllers offer a solution for off-grid applications such as telemetry, outdoor lighting, SCADA, and monitoring. This product was developed to ensure reliable battery protection under extreme weather/environmental conditions that often results in damaged electronics. The robust CIS-MPPT Series also has advanced lighting controls, programmable load timing, is IP68, and can offer 2 years of performance data (with accessory).
www.phocos.com
Repowertek, Inc.
PRIME Battery regenerators were developed using a high-frequency pulse technology and restoration algorithm, which creates micro-bubble featured de-sulfation effects by the real high-frequency pulsations. PRIME can restore inside cells by melting sulfate crystals on the plates and grids, and improve its capacity and life span almost like a new battery. Thus, PRIME provides high charging performance for used-batteries. PRIME battery regeneration technology provides battery life extension and cost savings.
www.repowertek.com
MK Battery
MK Battery now distributes the Deka Solar Fahrenheit advanced AGM battery HT200ET which is specifically designed for energy storage in Grid Tied backup systems in high heat applications. Engineered for high power, their exclusive IPF Technology enhances energy capacity, cell consistency, and long-term reliability. The Deka Fahrenheit battery case is constructed of THT Plastic, specifically designed to resist heat and optimize compression, and the TempX Alloy helps inhibit corrosion under high temperature extremes. Epoxy-sealed posts eliminate leaks while the case and cover are heat sealed and 100% tested to prevent overall leakage. To further mitigate thermal buildup and cell dry-out, the Microcat Catalyst is utilized to lower float current and maximize the efficiency in high-heat applications.
www.mkbattery.com
JANUARY•FEBRUARY2019 /// www.nacleanenergy.com
9
Rolls Battery Engineering
Designed to deliver longterm reliable energy storage in a heavy-duty, dual-container design, Rolls 5000 Series 6 volt models offer heavy- duty thick plate construction for extended cycle life and durability, convenient modular cell assembly for transportation and mainte- nance, and high Amp-Hour capacity options to suit small to large- scale renewable applications.
www.rollsbattery.com