Page 52 - North American Clean Energy May/June 2019 Issue

52
MAY•JUNE2019 /// www.nacleanenergy.com
Accurate and reliable sodar systems
REMTECH manufactures DOPPLER SODAR(s). eir SODAR systems remotely measure a vertical pro le
of thermal strati cation, horizontal and vertical wind speeds, horizontal wind direction, and turbulence parameters. e vertical range is well over the largest wind mills highest level (250m). ey are accurate, very low power, and extremely reliable.
REMTECH Inc. | www.remtechinc.com Booth 4537
HEICO FASTENING SYSTEMS
The best value to secure bolts.
HEICO-LOCK®
WEDGE LOCKING SYSTEMS
The HEICO-LOCK® wedge locking system is the reliable solution to the problem of securing bolted joints in high vibration assemblies against self-loosening by rotation!
WWW.HEICO-GROUP.COM
Offshore wind developer
For 25+ years, Ørsted has been developing, constructing, and operating o shore wind farms and is responsible for more than a quarter of the world’s installed o shore wind capacity. In the U.S., Ørsted can deliver clean energy
to the seven states on the East Coast
that have committed to build more
than 10GW of o shore wind capacity
by 2030. ey operate the Block Island Wind Farm, America’s rst o shore
wind farm, and have a comprehensive geographic coverage with a large pipeline of development capacity. Ørsted is committed to bringing the bene ts of o shore wind to the U.S., including cost competitive, clean, reliable energy along with economic growth and job creation.
Ørsted U.S. Offshore Wind
us.orsted.com
Booth 3603
Engineered synthetic lifting slings for wind energy installations
Samson’s patented high-performance HMPE multi-loop lifting sling, Agile Lifting System, has an optimized design with a smart con guration that allows
for shorter slings in wind installations, which translates into headroom savings and the ability to utilize a shorter boom. Synthetics are also 80% lighter in weight than their steel-wire counterparts. e shorter, lighter sling allows a smaller crane to be contracted and therefore reduces installation costs. Synthetic slings are cost e ective for wind installations, and also o er the bene ts of easy handling and high lifting capacity.
Samson Rope
www.sampsonrope.com
Booth 3342
Project development and planning
With more than a century of experience building power infrastructure throughout North America, Burns & McDonnell has provided engineering and consulting services on more than 60,000MW of renewable wind capacity. eir team
can support every aspect of a wind
farm’s life cycle. From siting to detailed design, environmental permitting to technology selection, grid planning to due diligence, owner’s engineer services, and much more. ey also have the engineering perspective to model and design necessary interconnections
with the high-voltage grid. e in-
house team of Burns & McDonnell engineers, environmental specialists, and consultants can develop a customized set of services to help their clients optimize the value of their wind projects.
Burns & McDonnell
www.burnsmcd.com
Booth 1415
Manufacturer, converter, and distribution operations Pittsburgh Electrical Insulation’s (PEI) North American locations have the ability to slit, punch, block, sheet, and laminate both rigid and exible electrical insulation materials – their HSP Tape, Dacron Felts, Armature Banding Tape, surge rope,
and edging tapes are manufactured in- house to customer speci cations. PEI is also a global distributor for producers
of commutators, lugs, cables, berglass tapes, mica tapes and sheets, shrink and non-polyester lms, Te on and Te on glass, silicone rubber tapes, slot liners and wedges, heat shrinkable products, laminates, resin kits, insulating paint, conductive tapes, foam tapes, slot llers, specialty coatings, adhesives, and greases.
Pittsburgh Electrical Insulation
www.peipittsburgh.com
Booth 3103