Page 57 - North American Clean Energy May June 2018 Issue

Wind industry solutions
Timken has designed a Tapered Double Inner (TDI) roller mainshaft bearing as a direct drop-in, high-performing, reliable solution. Timken’s bearing product line now includes two deep groove ball bearing options, designed to reduce electricity arcing across the bearing. Lovejoy couplings have an anti- ail device and use an integrated electrical isolation joint to prevent generator eddy current damage
to gearbox bearings. e WindTC from AeroTorque is a torsional control device that reduces damaging loading in the drivetrain. Timken has developed a special grease formulation to suit unique needs, helping customers select the right mix
of high-temp, anti-wear, water-resistant additives. In addition, a Groeneveld automated lubrication delivery system that remotely dispenses precise amounts of grease will be featured.
The Timken Corporation
www.timken.com
Booth 3620
Anchor bolts and fastening systems
Cooper & Turner is a manufacturer of high quality, high strength, safety critical, large diameter (M16 to M100) hex bolts, double ended studs, and thread rod. Employing automation (including in process NDT inspection) and robotics results in high quality and consistent products, having full lot traceability, for supplying the global wind turbine market, OEM’s, and major tiers as well. Recently opening an anchor bolt manufacturing plant in Pueblo, CO., they use 100% USA material and manufacturing, producing anchor bolts to ASTM A615 Grade 75 and Grade 90, plus ASTM A722 Grade 150, with all accessories (nuts, washers, and PVC sleeves), with bolt caps and grease optional. All assemblies are tested in a USA independent lab.
Cooper & Turner
www.cooperandturner-usa.com
Booth 4644
Integrated solutions
Ulteig has contributed design and eld services to over 21GW of renewable energy projects across the U.S. eir
team of experts provides a full range of services to support every aspect of a wind project, from a particular engineering scope, to fully integrated project design and management services. From project start through completion, they assist
their clients by providing successful on-time and on-budget performance, regardless of the project size, scope, and structure. e continued demand for cost e ective and reliable renewable energy sources is driving the need for a high
level of engineering expertise necessary to support this trend. Ulteig provides energy developers, owners, contractors, and utilities with solutions and full project support and execution.
Ulteig | www.ulteig.com Booth 2134
High performing gearbox oil
Shell’s engineers have created a wind turbine gearbox oil that delivers exceptional oil life, tested using the ASTM D2893 method. ASTM D 2893 exposes the lubricant to heat and oxygen (in the form of air) for prolonged periods to accelerate aging. A measure of the viscosity increase at the end of the test is used to gauge the resistance to ageing. e less the lubricant thickens, the higher its resistance to ageing. Shell’s new wind turbine gearbox oil, Shell Omala S5 Wind, was tested against the standard test, and subjected to a four-fold increase in the test duration. Shell Omala S5 Wind o ers an oil life of ten years in the eld, giving wind turbine owners and operators peace of mind of
its longevity and performance in today’s challenging conditions.
Shell | www.shell.com
Booth 1030
High yield wind turbines
e Nordex Group has installed more than 23GW of wind energy capacity in over 25 markets, and,
in 2017, generated revenues of
EUR 3.1 billion. e company currently employs a workforce of approximately 5,000. e product portfolio of the group is focused on onshore turbines in the 2.4 to 4.5MW class, which are tailor-made for the market requirements in developed and emerging markets. e group o ers multi-megawatt wind turbines for nearly all geographical regions, from grid-constrained, unrestricted projects to sound restricted, land- constrained, complex terrains. Nordex USA Inc. www.nordex-online.com
Booth 2626
Fully automated blade inspections
SkySpecs is a robotics company o ering fully automated blade inspections. After the push of a single button, their inspections are completed in
under 15 minutes, and data is available for viewing in the SkySpecs portal in under 48 hours. SkySpecs provides worldwide onshore and o shore inspections for their wind energy customers.
SkySpecs | www.skyspcs.com Booth 4847
wanzek.com 701.282.6171
Renewable Energy Construction + Services Wanzek delivers excellence through our
commitment to safety, expertise in construction planning, exceptional services and outstanding teams.
North American Clean Energy
57