Page 23 - North American Clean Energy January/February 2020 Issue
P. 23

      Safety & Fall Protection Equipment
SEE AD ON PAGE 25
According to the National Safety Council, falls are one of the leading causes of deaths in the workplace. Perhaps more than any other type of workers out there, those who erect and maintain wind turbines are exposed to some of the most serious, and potentially fatal, fall hazards. With many turbines reaching heights of well over 100 feet tall, wind farms are only growing upwards in many cases, and exposure to high winds can make work at high elevations even more hazardous. Here we highlight some of the latest in safety and fall protection equipment—a must for the growing industry.
SEE AD ON PAGE 24
wind product spotlight: safety & fall protection equipment
       Blaklader LLC Product: 1636 FR work pants
Application: Work pants for the renewable energy sector
Description: Blaklader FR gear is tested and compliant with NFPA 70E for wearers’ protection. 1636 workpants are HRC 2 compliant, with an 11 calories/cm2 arc rating. 88% cotton, 12% polyamide, twill flame retardant 10 oz, Arc Rating 330 g/m2
Key Features:
• Built in utility pockets;
• Built in Kneepad pockets;
• Triple stitched seams;
• Bellowed and lined back pockets;
• Knee protection pockets with two placement level options.
www.blaklader.com
    TeSuCon Technical Support & Consultancy
 Product: The Evacuator
Application: Fireproof collective escapes
and emergency descent solution
Description: Designed to save the lives of those working at altitudes ranging up
to 984ft (300m), the Evacuator is a fast, simple, and easy-to-use (click and go) fireproof collective escape and emergency descent solution. Fireproof units are customized for each turbine model and can be installed inside or outside of the nacelle, onshore or offshore. Emergency descent is fully-automatic and mechanically controlled at a speed of 3.3ft/sec (1m/sec), without use of electricity. Units are compact and easy to maintain.
Key Features:
• Fireproof units are 3182°F (1750°C) for 30 minutes or 2192°F (1200°C) for 90 minutes;
• Suitable for onshore or offshore applications;
• Certified in compliance with ANSI Z359, CSA Z259
www.tesucon.com
 Hi-Line Utility Supply Co. Product: Hi-Grip Xtreme Glove Protectors
Description: The Hi-Grip Xtreme glove protectors are now Arc rated to ASTM F2675 / F2675M-19 standards: Up to 28 cal/cm2 and ANSI cut-resistance Level 2 on the entire glove. The Hi-Grip Xtremes feature a full, silicone grip palm providing supreme control with a Kevlar underlay and Kevlar stitching for maximum strength seams. The secure straps have been upgraded to reinforced leather in addition to
the all leather cuff. New sizes and mitt-style protectors are available with an improved thumb design that provides greater dexterity. They have been field tested for durability and include a wear guard on top of the hand for extra protection.
www.hilineco.com
3S Lift
Product: Climb Auto System CF-120E
Application: Ladder mounted technician lift for wind turbine generators
Description: The Climb Auto System is wind's next Climb Assist, improving safety and reducing the cost of ownership. The Climb Auto System
is a single technician ladder-mounted lift, retrofittable to any new or existing
Power Climber Wind Product: IBEX
Application: Turbine climb assist
Description: The IBEX climb assist from Power Climber Wind sets the standard for performance, safety, and ease of installation in any new or existing turbine. Its intelligent control system delivers a comfortable and responsive climb. Using a continuous closed feedback loop, the IBEX instantaneously adjusts to changes in climbing speed or direction, allowing for a safe, smooth, and confident climb. With more than 70 years of performing productively at height, Power Climber Wind designs products that, like IBEX, drive low total cost of ownership and user satisfaction.
www.powerclimberwind.com
FallTech
Product: FallTech for Tools
Application: Dropped object prevention
Description: Falltech for Tools is a
complete ANSI/ISEA 121-2018 tested and compliant range of solutions that feature tool attachments, tool tethers, premium self-fusing no-heat tool tape, speed clip attachment tethers, a wrist anchor attachment system, and hard hat tethers. FallTech for Tools is designed to accommodate the most commonly used tools in construction trades, general industry, oil and gas, utilities, and other industries. These include tools with captive eyes, open and closed handle tools, open and closed handle tools with triggers, including impact hammers, wrenches, screw drivers, spud wrenches, power tools, and many others.
www.falltech.com
Checkmate by PSG Product: Xplorer Fall Protection Harness
Application: Fall protection
Description: Comfortable harness featuring
a rear D ring for multiple loadings with a small amount of vertical adjustment that stops
strap migration, large front ring for multiple attachments, key-way entry exit buckle with Velcro security wrap for a safe final connection. Hardware is ergonomically suited to reduce wear on webbing, for easy connections and critical pivot points for greater articulation. Unique curved webbing that follows the contours of
the body for a closer fit and innovative sub- pelvic assembly for support and comfort when suspended. Meets EN 361:2002, EN12277:2007 Type A, EN358:2000, ANSI Z359.11-2014.
www.checkmateuk.com
   wind turbine ladder, that completely removes the physical and mental stress of climbing, allowing technicians to keep their mind on the job, not on the climb. With over 21,000 units installed globally and certifications from CE, UL, ANSI, OSHA and more, the Climb Auto System is a safe and cost effective way for technicians to ascend a tower.
www.3slift.com
North American Clean Energy
23
        










































   21   22   23   24   25