Page 67 - North American Clean Energy January February 2014

OTHER
Cathodic protection

Signal Energy Constructors

Signal Energy Constructors is a full-service design/
build general contractor providing engineering, pro-
TMEIC
curement, and construction (EPC) services for utility- LP Hoying, LLC
TMEIC’s PV inverter product line includes high- scale solar/PV projects throughout North America.
eficiency Solar Ware inverters, rated from 100 Their ability to self-perform the key components of LP Hoying Solpro systems are ready-to-install solar
kW up to 1667 kW. The Solar Ware Samurai Danfoss Solar Inverters
power supplies, with 12/24-volt 0-amp to 10-amp
Danfoss’ QLX Series PV inverters come in 1 any solar project—including the structural foun- output ratings, that are shipped complete with
1.667 MW inverter will be UL listed at 1000 dations, mechanical completion, and installation
VDC, offering an advanced hybrid cooling MW to 1.5 MW. Operating without de-rating, of ixed and tracking systems, as well as the HV temperature compensated charge regulator, solar
the US outdoor version is available for harsh panel(s), lead acid battery (with a minimum of 100
system that’s optimized for outdoor installa- weather operation at up to 50° C, and is com- electrical design of substations, collection systems, hours autonomy), heavy-duty battery box, switching
tions. TMEIC’s Solar Ware Main Site Control interconnection facilities, and transmission lines—
provides overall coordination and control of pletely sealed to withstand even the harshest output controller (with load drop for battery protec-
environmental conditions. Further beneits of gives clients assurance that their construction pro- tion), heavy-duty steel pole with panel support, and
utility-scale PV plants, providing access to jects will be completed on time and within budget. wiring harness. Installation is easy and all required
complete information about an entire plant’s the QLX Series include: a painted aluminum www.signalenergy.com
power production.
enclosure, built-in communication via Danfoss’ materials are provided. Other ratings are available.
Etherlynx protocol; conigurable grid interface; www.lphoying.com
www.tmeic.com
skid solution with one or two QLX Series units;
ride-through capability to meet FERC 661A
requirements; and NEMA 4/ NEMA 3R. Electrical products & solutions

www.danfoss.us/solar

ABB
ABB’s portfolio of products, systems, and solutions

USA Wire & Cable, Inc.
for the solar industry is extensive, ranging from
USA Wire & Cable’s Solar Solutions supply the ca- CG
rooftop commercial installations to utility-scale

bles needed for all solar projects, including PV, CPV, CG provides electrical products and solutions for power plants. Their turnkey solutions cover the en-
tower, and parabolic trough. Their PV wire includes: grid interconnection of renewable energy projects, tire scope of supply, including PV solar power plants
Type USE-2, RHH/RHW-2, 600V/RW90, 1 kV, XLP and integration of renewables into isolated and
including for solar power. CG’s products and solu- PVHardware
insulation, and 60 mils; Type USE-2, RHH/RHW-2 2 tions include: HV, MV, and LV transformers; MV microgrids, to feasibility studies and site analysis,
kV, and XLP insulation 75 mils; 2kV, EPR/CPE, direct switchgear; HV substation engineering and turnkey PVHardware is a provider of innovative solar as well as site clearance, plant design, engineering,
burial; 2 kV aluminum feeder; as well as MV 5 kV to hardware, designed to deliver the lowest total manufacturing, procurement, erection, commission-
systems; SCADA and smart grid protection; as well cost of installation. The UtilityMax Ground
35 kV, armored, control, tray, and instrumentation as control and automation systems interconnecting ing, and grid connection.
cable. USA Wire & Cable also offers H4 solar con- renewable energy projects to utility grid systems. Mount System was engineered for quality, www.abb.com
cost eficiency, and rapid constructability. The
nectors, MC4 and MC4 equals, and custom-made CG’s manufacturing, engineering, and systems of- system utilizes optimized Z-purlins, which al-
string harnesses.
ices are located throughout North America, as well
www.usawire-cable.com
as globally.
low for spans exceeding 20' and require the
fewest foundations on the market (less than
www.cgglobal.us
300 per MW). UtilityMax has an adjustable

tilt feature that enables solar module installa-
tion with the structure in a locked horizontal groSolar

position, resulting in more eficient installation groSolar provides engineering, procurement, and
conditions.
construction (EPC) services for the 1 MW to 30 MW
www.pvhardware.com
commercial- and utility-scale solar markets. These
include design and build applications on brown-

ields, landills, water/wastewater treatment plants,
organic farms, agriculture, manufacturing facilities,
and commercial roofs. groSolar provides a one-stop

source for all solar project needs, including on-going
operations and maintenance.
www.grosolar.com

North American Clean Energy 67