Page 48 - North American Clean Energy January February 2014

2014 solar buyers guide

Kinetic

The watertight lashing kit made by Kinetic in-
cludes a baseplate that lush-mounts to the roof, Kinetic Solar Racking and
hb solar canada inc.
a 9" x 12" black lashing that maximizes coverage
hb solar engineers and designs mounting of the penetration points, as well as stainless Mounting
OMG Rooing Products
Kinetic Solar Racking and Mounting’s Aero-
systems for all types of rooftop PV. Of low steel hardware. The baseplate is secured to the compact S (south oriented), is the solution for OMG PowerGrip is a roof-mount system for
weight and low ballast, the SCIROCCO and roof with up to two lag bolts and has a separate mounting framed modules on lat roofs. It’s the securing solar racks to thermoplastic (TPO and
BLOCKMOUNT ballasted mounting systems blind stud on top for L-Bracket attachment, elimi- PVC) rooing systems. PowerGrip provides a
are available in 5°, 10°, 15°, 20°, 25°, and 30° fastest and least expensive mounting system
nating the through-hole that may cause water on the market, with excellent installation fea- secure connection directly to the roof deck.
tilts. SKYRACK lush mount system is designed leakage and lead to dry-rot. The unique raised tures. With Aerocompact S, an assembly time Once secured in place, properly installed
for shingled and pitched-metal roofs. VICER- channel provides an ideal place for sealant ap- PowerGrips limit rack movement and remain
ACK and VICERAIL tilted mounting for metal plication on the underside, while also diverting of 10 minutes per kilowatt can be achieved.
rooftops are also available in all tilt angles With the Aerocompact+ (east-west oriented), watertight. OMG PowerGrip assemblies are
water off the top of the lashing. The black tex- an assembly time of ive minutes per kilowatt easy-to-install and compatible with most solar
from 5° to 30°. hb solar projects are delivered tured, powder-coated lashing blends well with can be achieved. These systems are wind- rack systems. Since they eliminate the need to
with sealed, third-party engineering drawings all asphalt roofs, and easily slides under shingles cut open the roof down to the deck, the system
for building permit submission, and include
during installation.
tunnel tested, conform to UL 2703, and are
all the hardware necessary to erect a PV rack- www.kineticsolar.com
delivered fully pre-assembled, with protective saves time and labor. PowerGrips are available
matting and a barrier to prevent diffusion of in two sizes to accommodate most applica-
ing system with integrated Clic Loc bonding/ the plastic softener. An analysis of the lat-roof tions, providing tensile strength of up to 2,000
grounding clamps. They also come with a 10- pounds and shear strength up to 1,075 pounds.
year fully transferable warranty. design is also included for accurate ballasting. www.omgrooing.com | www.olyfast.com
www.hbsolar.ca
www.kineticsolar.com

Every Vision Should be Supported

Ontrack Solar

The new DXT1 Dual-axis Tracker with next-
generation innovations simpliies installation
and decreases maintenance. The Integrated
With Exceptional Frame Work
Beams create a smooth, slide-in PV panel
mounting system, eliminating the need for tra-
ditional racking. The full-length Fastclamp Bars
quickly secure panels. The Split-panel Design

virtually eliminates linear actuator failure. The
Zero Center-of-Mass reduces wear on major
parts. TCX2 Controller operates two DXT1
trackers. Available in the USA, pre-assembly

is available.
STRONG. DURABLE. COST-EFFECTIVE.
www.ontracksolar.com
These are the characteristics you need in solar panel mounting
systems — and Roll Forming Corporation can deliver like no one
else in the industry. As part of the world’s largest custom roll

forming group, with 11 ailiate companies in 10 countries, we
leverage the very latest technologies and innovations from around
the world to transform your unique vision into reality.
Roll forming is used to make a
variety of parts for the mounting
Roll Forming Corporation has all the capabilities to deliver above and racking industry including
and beyond your expectations.
purlins, complex hat sections and
mounting posts for industrial
[email protected] I www.RFCorp.com I (502) 633-4435.
ground applications.

CONTINUOUSLY SHAPING INNOVATION I RFCORP.COM

48 nacleanenergy.com
JANUARY/FEBRUARY 2014