Larson Electronics released an explosion proof, solar-powered LED strobe light for flammable environments. The system carries a Class I, Division 1 & 2 (Class I, Division 2 panel assembly); Class I, Zone 1 & 2; and Class II, Division 1 & 2 ratings. A Group B rating allows the LED strobe light to be used in facilities where combustible gas and liquid-produced vapor can be found, such as hydrogen plants. The EPSLED-HBNM-SOL-80C-C1D2-20C is equipped with a Class I, Division 2 rated solar panel, which provides power to four, 12V 18aH sealed lead acid batteries. The power cell components are located inside of the panel and not the light. Operators may mount the panel outdoors for maximum exposure to sunlight. Included with this unit is a heavy-duty 80ft 10/2 SOOW cord, connecting the explosion proof solar panel and batteries to the explosion proof LED strobe light. The explosion proof LED strobe lamp is a compact, 10W device for signaling in flammable facilities. Featuring a strobe count of four seconds, the fixture offers 1,050 lumens of light during use. A 360 ° beam angle and strobing flood configuration ensures maximum visibility in the work site. Color choices include red, green, blue, amber, or white. Mounting options include ceiling, wall, or pendant. This solar-powered, explosion proof LED strobe light offers automated functionality and features for hands-free operation. Day-night sensing turns on the LED strobe lamp after sunset and turns off the unit at sunrise. Motion sensing features activate the explosion proof LED strobe fixture upon detecting movement within the range of the sensor. Suitable for wet environments, the EPSLED-HBNM-SOL-80C-C1D2-20C complies with UL 844, UL 1598 (Marine Type) and CSA C22.2 No. 250/137.

Larson Electronics LLC | www.larsonelectronics.com