|
 The Larox progress cavity pump is designed for the most demanding industrial slurry and paste pumping applications. Due to its unique features and patented design, high efficiency and high pressure are achieved with a shorter construction. It also requires less energy, is easy to install, and requires less maintenance resulting in very low Total Cost of Ownership (TCO). With many innovative and patented features the new pump efficiency is significantly higher compared to conventional progress cavity pumps. It is also easy to install, saves power and maintenance time, offers longer servicing intervals with better pumping availability over a wide temperature and pressure range. The precise Evenwall 3D-technology with two-lobe rotor geometry allows for a rigid and tighter pumping unit compared to conventional progressive cavity pumps. All Larox progressive cavity pumps have a smaller interference between the rotor and stator reducing friction, with much lower starting torque and significantly higher pumping efficiency.
Larox Flowsys Inc.
www.larox.fi/flowsys
|
|
|
Calnetix Power Solutions (Calnetix) announced a new revenue stream for organizations whose machinery and industrial processes generate low-temperature waste heat. Calnetix estimates that two-thirds of the fuel burned to generate power is lost as heat. Its new range of Waste Heat Power Generation machines can turn heat generated by small-scale reciprocating engines (such as landfill gas engines), biomass boilers, turbines, and industrial processes (including incinerators and processing plants) into electricity, which can then either be re-used or sold back to the grid. This is a proven technology that adds additional revenue streams with few variable costs to all kinds of manufacturers, agricultural waste sites, mills, landfill sites, and any other industrial process that generates waste heat at temperatures higher than 121ºC.
Calnetix Power Solutions
www.calnetixps.com
|
|
 Briquettes and fuel pucks are the intelligent alternative to pellets: less capital intensive, lower operational costs, and higher densification of the biomass. Di Più Srl offers 30 years of experience in the design and manufacture of heavy duty mechanical briquetting presses, and provides full support to design, supply, install, service and parts in North and Central America. Highly dependable, these presses reach pressures up to 36,000 psi. Briquettes and fuel pucks can be made from wood, as well as wood waste, paper, cardboard, agricultural and energy fibers, nuts and grain shells, MSW, RDF, water treatment plants solids, coffee grinds, and much more. Briquetting, or compressing into pucks, make these materials ready for the energy markets.
Sunomi LLC
www.sunomi-llc.com
|
|
|
 DuraTech’s versatile, new 5064 Horizontal Grinder is built to meet all grinding needs. The 5064 Horizontal Grinder is a more compact version of the massive 9564 Horizontal Grinder, and can be used in a variety of environments and applications. Not only is it available on either a track or trailer, but users can also choose from three different levels of CAT Tier III horsepower, ranging from 475 hp (354 kw) to 630 hp (470 kw). The large feed opening and 64-inch hammermill maximize grinding capacity and minimize job time. This mid-sized grinder increases efficiency and maximizes investment. The 5064 Horizontal Grinder will be available this fall and can be ordered at local dealerships.
DuraTech Industries
www.duratechindustries.net
|
|
 The 4310 drum chipper is the latest in a long line of chipping and grinding machines produced by Peterson. The 4310 drum chipper is suited for high-volume biomass producers who have a wide variety of feed material, from logs up to 26 inches (66 cm) in diameter, to brush and small feed stock. The 4310 is powered by a 765 HP (570 kW) C18 Caterpillar engine. At 52,000 lbs (23,586 kg), the 4310 was designed for operations requiring high production and tracks for frequent moves between jobs. The chipper utilizes a 36-inch (914 mm) diameter by 40-inch (102 mm) wide drum. Other key features include a sloped feed deck for ease-of-feeding the chipper and wear resistant AR 400 wear surfaces on the drum pockets and shell. Optional material sizing grates minimize oversize twigs and branches in the chips, and an optional chip accelerator helps with loading.
|
|
Read more...
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
